VESSEL TYPE
Fiberglass Fish Dragger
DIMENSIONS
Reg L 62.7’ LOA 68’ x W 19.8’ x D 8.5’
HULL
1980, DESCO Marine, St. Augustine, FL
FUEL CAPACITY
9,500 Gallons
ENGINE
Cummins KTM (425 HP)
Videography + Photography by Halsey Fulton
VESSEL TYPE
Steel Fish Dragger
DIMENSIONS
L 64.8” x W 22' x D 10.3'
HULL
1979, St Augustine Trawlers, FL
FUEL CAPACITY
10,000 Gallons
HOLD CAPACITY
80,000 lbs
ENGINE
Cat 3412E (600 HP @ 2200 RPMS)
Videography + Photography by Halsey Fulton
VESSEL TYPE
Fiberglass Scallop/Fish Dragger
DIMENSIONS
L 44' x W 17' x D 6'
HULL
1988 Atkinson Smith
FUEL CAPACITY
240 gallons
HOLD CAPACITY
30,000 lbs
ENGINE
Volvo TMD121C (330 HP)
$101,000 spent since May 2023. New Features Include:
New water tight deck ( pressure treated beams, pressure treaded stringers, fiberglassed plywood .
New paint and Gelcoat inside and out.
New Garmin electronics ( plotter/ Radar/ bottom machine and transducer.
New monitor display for time zero hook up( time zero not included).
New Garmin auto pilot ( completely new entire system compass and all).
New antennas.
New bilge pumps.
New automatic bilge pump / high water alarm switch.
New high water alarm.
Four new 8D batteries .
All new wiring from engine/ batteries to the panel.
New 4,000 watt inverter.
New LED running lights.
New LED towing lights
New Raycore filter system.
All new fuel lines.
All new steering lines and fittings.
New Hydrolic lines.
Freshly rebuilt PTO.
P75 hydrolic pump 3 years old.
PL 5 cargo winch 1 year old.
Charlynn 10,000 hydrolic motor on scallop winch 1 year old ( scallop winch is a very nice dog winch built by Tyler Marine )
Cargo wire 1 year old.
5/8 main wire 2 years old.
New 4”/4”/1/2” aluminum Gallest frame ( bolted down with 16 1” bolts)
New aluminum Net Reel that bolts on Gallest frame ( 4’ washers by 8’ wide with charlynn 6,000 hydrolic motor 80 series chain.
New smart TV in galley.
Other Gear Included:
Heavy duty 10’ blue fleet scallop dredge in great shape.
Two matching freshly needle gunned and painted fish drag winches charlynn 6,000 series motors in good shape ( power in and out winches, they hold approximately 300 fathom of 7/16” wire. ( new never used 3 way power beyond valve bank that I had built for the winches, valve not included in sale but is available for an additional $4,000.00)
Spare Steel Gallest frame in great shape ( round stock).
Boat potentially comes with my tie up slip in Gloucester for the NGOM season ( slips are very hard to come by in Gloucester that time of year).
Videography + Photography by Sam Wilson
VESSEL TYPE
Steel Fish Dragger
DIMENSIONS
L 72.7' x W 22.4' x D 10.9’ (78.0’ LOA)
HULL
1979 RYSCO (Blountstown, FL)
FUEL CAPACITY
12,000 gallons total capacity
ENGINE
Caterpillar 3412 (764 HP)
Photography by Halsey Fulton
VESSEL TYPE
Offshore Lobster & Crab
DIMENSIONS
L 88.4' x W 25.0' x D 12.5’ (105.0’ LOA)
HULL
2001 Bayou LaBatre, AL
FUEL CAPACITY
36,000 gallons total capacity - (18,000 gallons currently used in forward tanks)
HOLD CAPACITY
35,000 to 40,000 refrigerated sea-water capacity
ENGINE
Caterpillar 3508
Photography by Halsey Fulton
VESSEL TYPE
Fish & Scallop Dragger w Part-time Scallop Permit
DIMENSIONS
L 74’4" x W 23’0" x D 12’2"
HULL
1998 – Ocean Marine Inc, Bayou La Batre AL
FUEL CAPACITY
10,000 gallons
ENGINE
1998 Caterpillar 3412 (540 HP)
Masson RCD 320 with 5.85:1 ratio
FEATURES & RECENT UPGRADES
Includes a Part-Time Scallop Permit (see below)
Photography + Video by Halsey Fulton
VESSEL TYPE:
Offshore Lobster & Crab
DIMENSIONS
L 64.8' x W 19' x D 9'
HULL
1979 St. Augustine, FL
FUEL CAPACITY
6,000 Gallons
ENGINE
Caterpillar 3412 (455HP)
Photography + Videography by Halsey Fulton
Take a 3D Tour of Two Anns
Click play to take a virtual tour through the boat, including the engine room, fish hold, and main cabin. Select anywhere on the image to move to that section and see it in more detail, or click on the search icon to move to a new area of the boat.
VESSEL TYPE
Steel Fish Dragger
DIMENSIONS
51.5’ x 18.0’ x 8.8’
HULL
1998 Bayou LaBatre, Alabama
FUEL CAPACITY
3,000 gallons
ENGINE
Cat 3406 (400 HP)
Photography by Halsey Fulton
VESSEL TYPE
Steel Longliner (Swordfish & Tuna)
DIMENSIONS
75’ x 20’ x 8’
HULL
1989
ENGINE
Scania D1 13 PDE
500HP
FUEL CAPACITY
7,000 Gallons
FEATURES
• Shark Directed
• New Aluminum Wave Wall
• Two new generators July 2021
60 KW John Deere
50 KW Kubota
Photography + Videography by Halsey Fulton
Take a 3D Tour of Market Price
Click play to take a virtual tour through the boat, including the engine room, fish hold, and main cabin. Select anywhere on the image to move to that section and see it in more detail, or click on the search icon to move to a new area of the boat.
VESSEL TYPE
Fiberglass Tuna Yacht & Scallop Dragger
DIMENSIONS
54.0’ x 17.5’ x 6’
HULL
2017 Wesmac, Surrey Maine
FUEL CAPACITY
1,800 gallons
ENGINE
Cat C18 (803 HP) — 12,000 hours
KEY FEATURES
New Main Engine cooler in 2020
Touch Screen and Manual electronics package
Sat TV
Private Captains Stateroom
New zincs and bottom paint Jan of 2022
Large insulated fish hold easily reconverted back to 49 crate lobster tank
Extensive Durabrite Lights package
Photography + Video by Halsey Fulton
VESSEL TYPE
Steel Fish Dragger
DIMENSIONS
71.1’ X 22.4’ X 11.1'
HULL
1979 Warren, Rhode Island
ENGINE
Twin Deutz 6 Cylinder model SBA 6M (385 HP each)
KEY FEATURES
MA Summer Flounder & Swordfish Hand Gear
Photography + Video by Halsey Fulton
VESSEL TYPE
Wood Gillnet & Lobster
DIMENSIONS
47.6 x 16.2 x 7.3 —
ENGINE
Detroit Diesel (250 HP)
HULL
1976, Linwood Parker, Harkers Island
Federal Fishery Permit
• Monkfish C and Area 2 Lobster
• Max Baseline 45 feet X 480 HP
Photography + Video by Halsey Fulton
Vessel Type
Fish Dragger
Dimensions
112.0’ (LOA) X 30’ X 10.5'
Hull
1984 Bender Shipbuilding, Mobile AL
Fuel Capacity
14,761 gallons
Engine
Cat D3516
Spring 2019
Complete refit ($900,000) including:
• Electrical work ($150,000)
• Fishing Gear including new nets ($175,000)
• Engine and generator repairs & upgrades ($150,000)
• Painted & upgrades to living area and pilot house ($150,000)
Summer 2019
• Overhaul of RSW tanks & refrigeration ($140,000)
• Hydraulic repairs ($160,000)
2020
• Addition of Marport wireless trawl monitoring system ($140,000)
Photography by Halsey Fulton
VESSEL TYPE
Fish Dragger
DIMENSIONS
112.0' (LOA) X 30.1’ X 10.8'
HULL
1981, Eastern Shipyards, Panama City FL
FUEL CAPACITY
26,000 gallons
ENGINE
2004 Twin Cat 3412 (1450 HP — 725 HP each)
Twin Disc MG5222 gears, 5:1 ratio. 61”, four-blade, bronze props.
TANKAGE SYSTEM
• Tanked RSW system with 525,000 lb capacity
• (6) refrigerated fish holds, heavily insulated.
• (2) Docal titanium chillers
• (2) Sabroe compresors, and copper nickel condenser.
ADDITIONAL FEATURES
• Hard-piped vacuum pumping system and return water system.
• Hydraulic boom crane midship.
• Full accommodations for crew of 6-8.
• Comprehensive electronics package.
Fall 2020, complete refit ($800,000) including:
• Plate over or replace any weak steel identified in audio gauge.
• Replate a major portion of main work deck.
• Replacement of any weak bull works caps midships.
• Blast and total renewal of all coatings
May 2020
• Rebuild and reconditioning of twin Caterpillar main engines and generators (over $500,000)
July 2020
• Addition of Marport wireless trawl monitoring system ($140,000)
2022
• New Trawl doors on NP (never used yet)
• New level winds on Main winches (NP)
• Upgraded aft net reel for NP
Photography by Halsey Fulton
VESSEL TYPE
Steel Longliner (Swordfish & Tuna)
DIMENSIONS
85.4’ x 24’ x 12.3’ (registered length)
HULL
1994 Bayou LaBatre AL
ENGINE
Two (2) Cummins Model KT-19 (425 HP at 1800 RPMs)
Twin Disc model MG 516 reverse/reduction gear with a 4.52:1 ratio
FUEL CAPACITY
20,000 Gallons
Photography by Ryan Chowansky
VESSEL TYPE
Steel Scallop Dragger
DIMENSIONS
73.4' x 23.5' x 10'
HULL
1979, Palatka, Florida
FUEL CAPACITY
7,800 Gallons
ENGINE
Twin Cat C18s rated at 450 HP each
FEATURES & RECENT UPGRADES
Completed in 2021
Replated Wheelhouse Floor
New Wheelhouse
New Windows
New Joinery/Carpentry (throughout wheelhouse) New Electrical
Replated Deck
Replated Stern Fuel Tanks Replated Starboard Fuel Tank
Wheelhouse Joinery & Electrical/Electronics install
Photography + Video by Halsey Fulton
VESSEL TYPE
Steel Scallop & Fish Dragger
DIMENSIONS
76.0' x 23' x 11.8'
HULL
1987, New Iberia, LA
FUEL CAPACITY
10,000 gallons
ENGINE
Cat 3412 (rebuilt in 2018)
Photography by Halsey Fulton
VESSEL TYPE
Steel Fish Dragger
DIMENSIONS
77.9' x 24' x 12.1'
HULL
1979, Bayou La Batre, AL
FUEL CAPACITY
6,000 Gallons
ENGINE
Cat 3508 (1,050 HP)
Photography by Halsey Fulton
FV GABBY G IS SOLD.
VESSEL TYPE
Steel Fish Dragger
DIMENSIONS
105’ (LOA) x 22’ x 11.5’
HULL
1985 La Force Shipyard, Bayou La Batre, AL
FUEL CAPACITY
11,000 gallons
ENGINE
Cat 3412 Turbo (764 HP)
Photography + Videography by Halsey Fulton
VESSEL TYPE
Steel Hull Shrimp Vessel (Freezer Boat)
DIMENSIONS
L 60' x W 19' x D 6'
HULL
1995 Bacliff, TX
ENGINE
Caterpillar 3408 Diesel Engine
Photography + Videography by Ryan Chowansky
Sign up with your email address and phone number to receive updates.
